Description - Metrix MX1 Notice De Fonctionnement

Description of instrument

Description

14
(see § Appendix)
The MX1 multimeter is for everyday use by electricity professionals. It
offers the following functions:
- Voltmeter voltage measurement (V
- Ammeter current intensity measurement (A
- Ohmmeter resistance measurement (Ω) with manual calibration.
- Audible continuity test
1 1 1 1
Safety terminals Ø 4 mm
•
COM common, terminal receiving the black lead
V Ω
•
for voltage and resistance.
•
A for µA, mA and 1,5A calibres using a clamp (
•
10A for 10A calibres (
2 2 2 2
7 range dial
•
2 black, with anti-parallaxe mirror, for the VAC, VDC and ADC (a)
and (b)
for the Ω measurements (c)
•
1 green
•
2 red for the AAC measurements (d) and (e)
•
1 red for the 5 VAC (f)
•
1 black for the dB measurements (g)
3 3 3 3
Fuse indicator LED
1.6A and 10A for intensity or voltage measurements, change the fuse(s) if
the LED is on (for V ≥ 110V).
Note: with the HS 10A fuse, the LED comes on for all calibres (for V ≥
110V).
The HS 1.6A fuse only causes it to come on for µA and mA calibres. The
other calibres operate normally.
4 4 4 4
Zero calibration button on the ohmmeter
(correction of battery wear status)
5 5 5 5
Function selection switch
)
DC/AC
English
and )
and )
)
DC/AC
Multimeter MX1