WIRELESS CHARGER
1
Introduction
Use the induction charging zone 1 to
charge a phone without using a cable.
Note:
– for more information on compatible
phones, contact an approved dealer
or visit the manufacturer's website;
– for optimal charging, position your
smartphone as far to the centre of
the induction charging area as pos-
sible.
GB.50
(1/2)
2
Charging procedure
Position your phone 2 in the induction
charging area 1.
Phone charging 2 is interrupted in the
following cases:
– an object is detected in the induction
charging area 1, as indicated by the
charging status 5. A message will
ask you to clear the wireless charg-
ing placement area so that only your
telephone is present;
– the telephone is fully charged, as in-
dicated by the charging status 3;
1
– the induction charging area 1 is over-
USB
10:45 I -5°C
Christie Calagan
Out off the grid
3
heating. Your telephone's charging
procedure 2 will restart shortly after
the temperature has decreased.
Objects left in the induction charg-
ing area 1 may overheat. You are
advised to place them in the areas
provided for this purpose (storage
compartment, sun visor compart-
ment etc.).