Renault Radio Connect R&Go Notice D'utilisation page 118

PAIRING, UNPAIRING A TELEPHONE
The search for Bluetooth® devices in
the vicinity begins (this search can take
up to sixty seconds.)
Select the telephone that you wish to
pair by rotating 6 or 15 then press 6 to
confirm.
From your Bluetooth® device, accept
the pairing request.
When the "connected" message is dis-
played on the audio system screen,
the Bluetooth® device is automatically
stored and connected to the vehicle.
On the screen, you will see your device
in the list of recognised telephones,
which can also be accessed from the
"Select device" sub-menu.
After 60 seconds, if pairing fails, the
"Pairing failed" message appears.
Repeat these operations again. Please
refer to your telephone's user guide for
further information.
(2/6)
Pairing a Bluetooth® telephone with
the audio system from your phone
This method allows you to make a
Bluetooth® search from your phone.
To pair your phone using this method,
perform the following steps:
– a c t i v a t e y o u r t e l e p h o n e 's
Bluetooth®;
– press 3 or 19 to access the "Phone"
menu;
– select "Pair device" using 6, then
press 6 or 18 to confirm;
– The message "Re-enter
XXXXXX" appears on the audio
system screen and a 60 second
countdown begins.
The audio system is then visible to
other Bluetooth® devices for approxi-
mately 60 seconds.
Search for the audio system using your
telephone, then select it (see your tele-
phone user manual) or accept the pair-
ing code with your telephone.
The message "MY CAR connected" or
"R&Go Multimédia" is displayed on the
audio system screen to confirm that
your telephone is paired and connected
with your audio system.
The message "R&Go Multimédia" is
displayed on the screen only if the
Pin:
R&Go application connects to the audio
system and if the application is installed
on your smartphone.
If pairing fails, the audio system display
returns to the "Phone" menu.
GB.33