Renault Radio Connect R&Go Notice D'utilisation page 123

CONNECTING, DISCONNECTING A TELEPHONE
Connecting a paired phone
Your phone must be connected to the
hands-free phone system in order to
use all its functions.
A telephone cannot be connected to the
hands-free telephone system unless it
has previously been paired.
Refer to the information on "Pairing a
telephone" in the "Pairing/Unpairing a
telephone" section.
Note: your telephone's Bluetooth®
connection must be active and set to
"visible".
Automatic connection
As soon as the vehicle ignition is
switched on, the audio system searches
for paired telephones in the vicinity.
Note: the priority telephone is the last
phone to have been connected.
GB.38
Searching will continue until a paired
telephone is found (this may take sev-
eral minutes).
Note: for more information on the list of
compatible phones, please contact an
approved dealer.
– you can use automatic telephone
connection with the ignition switched
on. You may need to activate the
automatic Bluetooth® connection
function on your hands-free phone
system. To do this, please refer to
your telephone user manual;
– when reconnecting, and when two
paired phones are within range
of the hands-free system, the last
phone to have been connected will
take priority, even if this phone is out-
side the vehicle but within range of
the hands-free system.
(1/5)
Note: if a call is already in progress
when your hands-free telephone
system is connected, the telephone will
connect automatically and the conver-
sation audio will switch to the vehicle
speakers.
Your hands-free phone
system is only intended to
facilitate communication by
reducing the risk factors,
without removing them completely.
You must always comply with the
laws of the country in which you are
travelling.
For safety reasons, carry
out these operations when
the vehicle is stationary.