Key Automation TURBO 30 Livret D'instructions page 14

GENERAL INFORMATIONS
We congratulate you for the excellent choice.
This handbook will help you during the
installation of your gear motor. You will
find explanation regarding gear motor's
functions and safety rules, which will
always grant you a perfect operating and
maximum safety.In order to avoid
damages on your equipment or to injure
yourself and other persons, please read
carefully and completely the present
handbook before installing the gear motor.
Preserve the instructions, so that everyone
can consult them before using the
motor.
We decline all consequences, coming from
wrong motor use or non-observance
of the listed precautions.
In case of malfunction, switch off immediately
the motor.
In case of reparations, be sure that supply
has been turned off.
Don't try to dismount the motor, if your not
authorized technician.
Don't expose to fire or heat sources, don't dip
in water or other liquids.
Use proper supply cables.
During installation, follow carefully the following saftey rules:
ATTENTION
SAFETY DISTANCE
USE WELDING
SAFETY RULES
USE GLOVES
GLASSES
EQUIPMENT
USING DESTINATION
Gear motor TURBO 30 has been studied
in order to move (opening and closure) of
residential sliding gates of maximum
350kg.Different use or higher weight, has
to be considered not conforming to
destinated uses.
The producer declines any responsibility
about damages caused from different
uses. Warranty is not guilty anymore and
risk gas to be provided for the gates'
owner.
Every different use from those herein
described is not allowed.
Gates which are motorized need to be
conforming to European laws, EN 12453
EN 12445 and Machinery Directives
97/37/CE.
For installation you need to have practical
and theoretic knowledge of mechanic
and electronic and also about laws which
regulate doors and gates automation.
Installation, test and maintenance must
be carried out from a professional
installator.not
Don't expose to fire or heat sources, don't
dip in
Use proper supply cables.
DON'T INSTALL
GEAR MOTOR IN
EXPLOSIVE
MIXTURES
SATURATED
ROOMS
authorized
water or other
ATTENTION
MOVING GEARS
MAINTAIN PROTECTIVE
CARTER
ELECTRIC SHOCK
For installation you
need following
equipment: keys,
screwdriver, rule,
saw, drill,
welder.
technician.
liquids.