GEZE TS 5000 ISM BG Mode D'emploi page 10

Mounting and securing
Mark out and drill fixing holes for door closer and guide rail using fitting template or cut M5 thread
X
if necessary.
6.2 Mount guide rail and end caps
Align spacers on moving and fixed-leaf guide rails (1.).
X
Fix guide rails in place (tightening torque: 2 Nm) (2.).
X
Align end caps on moving leaf and screw on (3.) (tightening torque: 2 Nm).
X
Slide on cover at fixed leaf (4.)
X
Mount door closer and sliding lever according to the mounting instructions (5.).
X
All screwing torques are to be adjusted on site, if necessary.
6.3 Connecting wire cable to trigger
Unscrew set screw and lock nut 12 mm at clamping part (1.).
X
Suspend ball on wire cable in the trigger lever (2.).
X
Guide wire cable into funnel (3.).
X
Thread clamping part onto wire cable (4.).
X
Insert clamping part and thread wire cable through oblong hole (5.).
X
Push wire cable redirection onto wire cable (6.).
X
GB 4
TS 5000 ISM BG
Fig.: 6.2.1
Fig.: 6.3.1