Costway ES10002DE Manuel De L'utilisateur page 3

Please read all manual carefully before using
Attentions
1. Be sure to disconnect power supply before taking apart, packing or
commissioning of any part of this product.
2. This product belongs to Y connection. If power supply cords are damaged,
please contact with our Customer Service Department in order to avoid risks. Be
sure not to take apart or repair by yourself.
3. Before use, please check if the power cord, plug, fine strainer, auger, noodle
extruding body and other parts are damaged. Please stop using the product if any
damage is found, and contact our customer service department in time, and do
not disassemble and repair voluntarily in case of danger.
4. If this product needs to be repaired in the course of application, please contact
with our Customer Service Department. Be sure not to take apart or repair by
yourself in order to avoid risks.
5. Before switching on the power, please make sure that the removable parts are
fully installed, such as the juicing body, auger, fine strainer, juicing body cover, etc.
6. During operation, in case of any damage to the operator or the product, it is
strictly forbidden to put fingers or sharp objects into the material inlet to directly
contact the rotating parts such as the auger, etc.; it is strictly forbidden to use any
object to replace pusher rods. It is strictly forbidden to keep eyes close to the
material inlet in case of any accident.
7. The ingredients should be cut into small pieces so that they can be put into the
inlet of the juicing body. If there are fruits and vegetables with kernel, hard seed,
thick skin or hard shell, remove them before process¬ing.
8. When ingredients are put in, the force to push the ingredients should not be so
great, and it is advisable that the ingredients can be cut off.
9. It is normal for the fine strainer, juicing body cover, auger and other parts to
be stained after juicing certain fruits and vegetables. It does not affect the quality
of the food and will not be harmful to eaters' health.
10. The product is equipped with an intelligent protection chip, making it
automatically stop after 20 minutes of continuous work. At this time, please stop
the operation for 20-30 minutes, and then continue to use the motor after
cooling. This method is conducive to extending the service life of the product.
03