3. Specifications / 4. Design and function
For special model numbers, e.g. S-20000, please note the specifications stated on the delivery note.
For further specifications see WIKA data sheet PE 81.61 and the order documentation.
4. Design and function
4.1 Description
The prevailing pressure is measured at the sensor element through the deformation of a diaphragm. By supplying
power, this deformation of the diaphragm is converted into an electrical signal. The output signal from the pressure
transmitter is amplified and standardised. The output signal is proportional to the measured pressure.
4.2 Scope of delivery
Cross-check scope of delivery with delivery note.
WIKA operating instructions pressure transmitter, model S-20
All manuals and user guides at all-guides.com
GB
13