Philips Ultinon LED-HL H4 Mode D'emploi page 9

All manuals and user guides at all-guides.com
• 5.8 Connect the power connector as shown in Figure 7.
• 5.9 Fixing the wire harness with plastic cable tie.
• 5.10 Check that the high and low beams of the LED4
headlight bulb both function correctly.
• 5.11 If the beams are positioned too high or too low,
adjust the light axis to an appropriate position as needed.
• 5.12 Store the original H4 bulb and the LED4
headlight instruction manual in a safe place.
• 5.13 The low beam should finally be equipped with the
clear bright-dark cut-off line shown in the lower left
figure; left figure for left drive vehicle, right figure for
right drive vehicle.
Figure-6
Figure-7
9