Philips Ultinon LED-HL H4 Mode D'emploi page 7

All manuals and user guides at all-guides.com
5 5
Installation steps for lamps
• 5.1 Ensure that the light fixture has a gasket seal and a
metal spring or similar attachment mechanism. Use the
metal spring to attach the bulb as shown in Figure 2.
• 5.2 Take the original bulb and gasket out of the light fixture.
• 5.3 Unscrew the heat sink from the LED4 headlight,and
take out the heatsink from the burner and connector as
shown in Figure 3.
Figure-2
Figure-3
7