Philips Ultinon LED-HL H4 Mode D'emploi page 8

All manuals and user guides at all-guides.com
• 5.4 Attach the LED4 burner into the bayonet of the light
fixture as shown in Figure 4.
• 5.5 Attach the metal spring.
• 5.6 Assemble the gasket on the LED4 burner and
ensure it is in the correct position as shown in Figure 5.
• 5.7 Adjust the heat sink into the correct position until it
cannot rotate further as shown in Figure 6. Ensure that
the air inlet channel for the heat sink is not blocked.
8
Figure-4
Figure-5