Fitting The Double Door - Hansgrohe PHARO Duschtempel 115 EL 40 29040 Mode D'emploi

F i t t i n g t h e d o u b l e d o o r
1
44
Fitting door
Hang both doors on their hinges. Lightly grease the seal
strips between door and columns with the enclosed
2
grease. Close doors. Ensure the correct positioning of the
seal strips. The door need to have some initial resistance
to be water proof. Position the splash guard A on the
shower tray between the two columns. The strip has
grooves running across its underside.
Attention the splash guard isn´t fixed, risk of
accident.
Ensure that the doors close tightly. When the magnet strips
on both door halves are parallel, tighten the hinges and
secure with grub screws. N.B.: the special grooved caps
are meant for the inside of the door.
Adusting doors
The vertical adjustement of the door halves can be made
on the hinges.
Horizontal adjustment can be made on the slotted holes
of the glass door. When making the adjustment ensure
that the door connect with the splash guard.
SW 6