Perform Connection - Hansgrohe PHARO Duschtempel 115 EL 40 29040 Mode D'emploi

P e r f o r m c o n n e c t i o n
1
2
3
A
40
B
4
5
6
7
Connect the over head shower hose (1) to the sole-
noid valve marked red. Connect the body shower
hoses (3) left and right and fit them to the solenoid
valve, marked yellow. Do the same for the hand
shower (2) and connect it to the solenoid valve
marked blue.
Tighten hose clips.
Position control unit A on the roof, as indicated.
Connect the three plugs for the halogen spots to the lght
relay B.
Join control pad
Disconnect the distribution plug "control pad" (5) and
fed connection cable (4) from the top through the
column. After that join connection cable with the
distribution plug.
Both control pads are identical. The connection
cable for the outer control pad is marked
with"Panel extern".
Join control pad with the connection cable. Look out for
the connection cable which is indicated with "Panel
extern" that it is fed to the outer control pad.