Hansgrohe PHARO Duschtempel 115 EL 40 29040 Mode D'emploi page 37

M o u n t i n g w a l l l p r o f i l e , c o r n e r - v e r s i o n
B
A
Use supplied flexible Silicone sealant on the fixing
brackets of the wall posts. Seal along the entire lenght of
fixing bracket.
For display purposes use the removable insta-
lation sealant instead of the supplied Silicone
sealant.
Fixing the wall profiles
Fit wall posts onto wall compensating ledge and shower
tray. Now screw the wall profiles to the shower tray.
Using the nuts and washers provided.
Align vertically the wall profile by placing the spirit level
on the front edge.
Now drill and screw the wall post to the compensation
strip. Using a 3mm drill connecting wall posts to
compensating strip with 4,2 x 13 cross head metal
screws.
Seal groove between wall posts and shower tray
with Silicone sealant. Make sure you cover the hole
area between wall posts A and back of shower
tray B. Spread the sealant up to the top of the
upper shower tray rim.
37