Operating The Machine; Normal Operation; Inserting The Wire; Touch Display And Operating Menus - Weidmüller Power Stripper Serie Notice D'instructions Originale

6

Operating the machine

6.1 Normal operation

► Things to check prior to each activation:
– Is the power cable in fault-free condition?
► Switch on the machine.
The touch display shows readiness for operation.

6.2 Inserting the wire

Only process wires that are cut cleanly.
All stranded wire must finish with the insulation.
No stranded wire may be shortened or protrude.
Ensure that the end of the wire is inserted even-
ly.
40 mm
Figure 6.1 Insert the wire correctly
LZ:
► Insert a wire into the insertion funnel.
The material is drawn in slightly and processed automati-
cally.
► Once the processing is complete, pull the processed
wire out.
2562260000/01/10.2017

6.3 Touch display and operating menus

The touch display indicates the current settings. It is
touch-sensitive.

6.4 Production menu

1
3
4
Figure 6.2 Touch display; display following activation
The touch display indicates the current operating condition:
1
Cross section (only on the Power Stripper 6.0, Power
Stripper 16)
2
Stripping length
3
AWG value
4
Draw-off length
5
Menu number
2
5
27