Publicité
Les langues disponibles
Les langues disponibles
1 Open the loading door, place the laundry
and put detergent, etc.
2 Select the washing programme,
temperature, spin speed and, if required,
the auxiliary functions.
3 Set the end time of your choice by pressing
the End Time button. End Time indicator
illuminates.
4 Press Start / Pause button. Time
countdown starts. ":" symbol in the middle
of the end time on the display starts
flashing.
Adjusting the end time
If you want to cancel End Time function, press
On / Off button to turn off and on the product.
C
INFORMATION
• Do not use liquid detergents when you
activate End Time function! There is
the risk of staining of the clothes.
C
INFORMATION
• You must press Start/Pause and wait
for the door to open to add laundry
into the machine during the End Time
countdown. Press Start/Pause once again
after adding the laundry to resume the
countdown. At the end of the countdown,
End Time indicator turns off, washing
cycle starts and the time of the selected
programme appears on the display.
• When the End Time selection is completed,
the time appears on the screen is the
total of the end time chosen with the
duration of the selected programme.
4.3.9 Starting the programme
1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing the
startup of the programme will turn on.
18 / EN
C
INFORMATION
• If no programme is started or no key
is pressed within 10 minute during
programme selection process, the
product will turn off automatically.
Display and all indicators will turn off.
• If you press on the On / Off button,
the programme information set
as default will be displayed.
4.3.10 Loading door lock
There is a locking system on the loading
door of the product that prevents opening
of the door in cases when the water level is
unsuitable.
"Door Locked" light in the panel turns on when
the loading door is locked.
4.3.11 Changing the selections
after programme has started
After the programme has started you can
make the following changes.
Switching the product to pause mode
Press the Start/Pause button to switch the
machine to pause mode while a programme
is running. The light of the step which the
machine is in starts flashing in the Programme
Follow-up indicator to show that the machine
has been switched to the pause mode. Also
loading door light blinks until the door is ready
to be opened. When the loading door is ready
to be opened Loading Door light will turn off,
programme step light will continue to flash.
Changing the auxiliary function, speed and
temperature
Depending on the step the programme has
reached, you can cancel or select the auxiliary
functions. See "Auxiliary function selection".
Also you can change temperature and cycle
adjustments. See "Temperature selection" and
"Spin speed selection".
C
INFORMATION
• If no change is allowed, the
relevant light will flash 3 times.
Adding or taking out laundry
1. Press the Start / Pause button to switch the
product to pause mode. The programme
follow-up light of the relevant step during
which the machine was switched into the
pause mode will flash.
Washing Machine / User's Manual
Publicité
