Publicité
Les langues disponibles
Les langues disponibles
C
INFORMATION
• If the programme has not reached
the heating step, you can change
the temperature without switching
the product to Pause mode.
4.3.6 Spin speed selection
Whenever a new programme is selected, the
recommended spin speed of the selected
programme is displayed on the spin speed
indicator.
To decrease the spin speed, press the Spin
Speed Adjustment button. Spin speed
decreases gradually.
Then, depending on the model of the product,
"Rinse Hold" and "No Spin" options appear on
the display. When "No Spin" is selected, the
rinse level indicator lights will not turn on.
C
INFORMATION
• If the programme has not reached
the spinning step, you can change
the spinning speed without switching
the product to Pause mode.
• Use a lower spin speed for
delicate laundries.
Rinse hold
If you are not going to unload your clothes
immediately after the programme completes,
you can use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when
there is no water in the product. Press Start/
Pause button after this process if you want to
drain the water without spinning your laundry.
Programme will resume and complete after
draining the water.
16 / EN
If you want to spin the laundry held in water,
adjust the spin speed and press Start / Pause
button. The programme will resume. Water is
drained, laundry is spun and the programme is
completed.
4.3.7 Auxiliary function selection
Select the desired auxiliary functions before
starting the programme.
Chosen auxiliary function indicator lights up.
C
INFORMATION
• When you try to change an auxiliary
function that is not allowed to be selected
with the current programme, indicator
light of the relevant auxiliary function will
flash and an audio warning is given.
Furthermore, you may also select or cancel
auxiliary functions that are suitable to the
running programme after the washing cycle
starts. If the wash cycle has reached a point
where no auxiliary function can be selected,
an audio warning will be given and the related
auxiliary function's light will flash.
C
INFORMATION
• Some functions cannot be selected
together. If a second auxiliary function
conflicting with the first one is
selected before starting the product,
the function selected first will be
canceled and the second auxiliary
function selection will remain active.
• An auxiliary function that is not
compatible with the programme
cannot be selected. (See, "Programme
and consumption table".)
• Some programmes have auxiliary
functions that must be operated
simultaneously. Those functions
cannot be cancelled. The frame of the
auxiliary function will not be illuminated,
only inner area will be illuminated.
Washing Machine / User's Manual
Publicité
