Adjusting The External Conveying Ploughshares - Checchi & Magli AL-S14 PLUS Manuel D'utilisation Et D'entretien

Adjusting the external conveying ploughshares

Adjust the external conveying shares so that they convey a sufficient amount of the soil within the forming sides.
Adjusting the working depth of the external conveying shares _____________________________________________
1) Loosen the screws (A) on both external conveying
shares.
2) Raise or lower the shares to increase or decrease the
amount of soil needed to create the bed.
3) Tighten the screws (A) on both external conveying
shares.
4) Decide whether to adjust the forming sides accord-
ingly (see "Adjusting the forming sides").
Adjusting the distance between the external conveying shares_____________________________________________
1) Loosen the nuts (B) on both external conveying
shares.
2) Loosen the screws (C).
3) Move the shares either closer together or farther
apart.
4) Tighten the nuts (B).
5) Tighten the screws (C).
6) Decide whether to adjust the forming sides accord-
ingly (see "Adjusting the forming sides").
Adjusting the angle of the ploughshares_______________________________________________________________
1) Loosen the screws (A) on both external conveying
shares.
2) Loosen the screws (C).
3) Loosen the nuts (D) on both external conveying
shares.
4) Alter the angle of ploughshares.
5) Tighten the nuts (D).
6) Tighten the screws (C).
7) Tighten the screws (A) on both external conveying
shares.
8) Decide whether to adjust the forming sides accord-
ingly (see "Adjusting the forming sides").
English language
ADJUSTMENT INFORMATION
A
UN41-0304LI
UN41-0303LI
UN41-0314LI
19
C
Use and maintenance
5
B