Defrosting; Shipment And Repositioning; Transportation And Changing Positioning - Bertazzoni HJVAGJD2.E.50 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 48

5.1 Defrosting

Defrosting the Refrigerator
Compartment
• Defrosting occurs automatically in
the refrigerator compartment during
operation. The water is collected by
the evaporation tray and evaporates
automatically.
• The evaporation tray and the water drain
hole should be cleaned periodically with
the defrost drain plug to prevent the
water from collecting at the bottom of the
refrigerator instead of flowing out.
• You can also clean the drain hole by
pouring half a glass of water down it.
Replacing LED Lighting
Depending on the model, one or two LED
strip in the cooler is used to illuminate the
interior of your appliance.
To replace any of the LEDs, please
contact the nearest Authorised Service
Centre.
Note: The numbers and location of the LED
strips may change according to the model.
! Some versions may not include cooler
illumination.
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
• The original packaging and foam may be
kept for re-transportation (optional).
• Fasten your appliance with thick
packaging, bands or strong cords and
follow the instructions for transportation
on the packaging.
• Remove all movable parts (shelves,
accessories, vegetable bins, and so on)
or fix them into the appliance against
shocks using bands when re-positioning
or transporting.
Always carry your appliance in the
upright position.
EN - 43

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lrd603ubnpvc/20

Table des Matières