Promise Technology VessRAID 1000s Serie Guide De Démarrage Rapide page 19

VessRAID 1000s Series Quick Start Guide
Choosing DHCP or a Static IP Address
When you setup your VessRAID, you have the option of:
• Enabling DHCP and letting your DHCP server assign the IP address to the
VessRAID's management port.
• Specifying a static IP address for the VessRAID's management port.
If you choose to enable DHCP, have your Network Administrator dedicate an IP
address for the VessRAID, linked to the VessRAID's MAC address. This action
will prevent the DHCP server from assigning a new IP address when the
VessRAID restarts, with the result that users can no longer log in.
To access the MAC address for VessRAID's management port:
1. At the administrator@cli> prompt, type menu and press Enter.
The CLU main menu appears.
2. In the CLU Main Menu, highlight Network Management and press Enter,
then highlight the management port and press Enter.
Default IP Address
VessRAID ships from the factory a default Management Port IP address of
192.168.0.1. You must change this address to work with your network.
MAC Address
19