FRONT HYDRAULIC DISk BRAkE INSPECTION
Brake fluid reservoir
Brake fluid level
Lower mark
1.
Inspect the front disk brake caliper for leakage. If brake fluid leaks, the safety of riding
could be affected.
2. Inspect the brake hose for cracks, and the joint for leakage.
3. Check the brake fluid level in the brake fluid reservoir, if level is at or below the LOWER
mark, inspect brake pads for wear and hydraulic system for leaks.
4. To add brake fluid, unscrew the 2 screws on top of the bake fluid container. Add DOT3 or
DOT4 brake fluid. Do not mix brake fluid types.
Brake fluid cap
Brake disk
Front disk brake caliper
Brake hose