Health check
The DVR offers a uniquely true DVR health monitoring, with pop-up messages and e-mail
notification on video loss, recording failure, and storage failure.
To setup:
1. Check the box next to "Enable Health Check"
2. Check the box next to the conditions you would like to be notified on.
3. Set the occurrence intervals. (For Example: when video loss occurs more than 1
time a minute)
4. Select whether to receive a pop-up message when conditions are met.
5. Go to Network ➔ Notifications.
6. Under e-mail notifications, make sure the Health Check option is enabled. When
any of the failures occur beyond the set conditions, the system will display a pop-
up alert and send an e-mail notification.
EN
13