Fein MM 300 Plus Mode D'emploi page 10

en
10
Technical description and specifications.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Not all accessories described or shown in this instruction manual will be included with your-
power tool.
Clamping lever
Application tool
Type
Order number
Current consumption
Rated oscillation rate
Amplitude
Weight according to EPTA-Procedure 01
Class of protection
On/Off switch
Thumbwheel for pre-selection
of oscillating frequency
Gripping surface
MM 300 Plus (**)
11000 – 20000 /min
3.08 lbs (1.4 kg)
Fig. 1
7 229 ...
2.4 A
2 x 1.6°
/II