Operation And Configuration; Basic Operation - Renkforce RF-IR-RETRO1 Notice D'emploi

Select "Yes (WPS)" if you want to set up the connection using the WPS function.
• As soon as you confirm, also start WPS on your router or access point. You have 120 seconds time to start WPS
on your router or access point.
• The connection will be established automatically between both devices and the radio will switch to the main menu.
• Select "Yes" if you want to configure the Wi-Fi connection manually. The internet radio will automatically search for
available Wi-Fi networks.
• Select your desired Wi-Fi network with the
(N and 3).
• You must enter the password for the selected Wi-Fi network. This is easiest with the help of the keys from 0 to 9 (L).
Look at the character list in chapter 7 c) Character sequence of each key 0 - 9 (L).
• Press the individual number keys repeatedly until the desired number or letter appears on the display. To go to the
right for the next character position of the password, press the
entry, you can do this with the
• Alternatively, you can also connect the letters and numbers in each case with the buttons
and (F and 10).
• To apply the password, confirm with the OK button (N and 3).
• The connection will be established automatically and the radio will switch to the main menu.

10. Operation and configuration

a) Basic operation
The basic operation of the internet radio is described below.
• The internet radio can be turned on or off with the
the device. When you turn it off, it switches to standby mode and displays the time, or the weather conditions if you
have enabled the function.
• You can switch between the different operating modes with the MODE (C) button on the remote control. The radio
always switches to the next operating mode when you press the button. The sequence is as follows: "AUX", "UPnP",
"iRadio".
• The display changes to your Favourites when you press one of the
function when the operating mode "AUX" is set.
• You can open the main menu of the device with the
the device.
• The (G and 6) and (M and 6) buttons have the same function on the remote control and the device. You can
use these buttons to navigate to the left and right in the menus. You can also go to the previous option in the menu
with the (G and 6) button.
• Use the two arrow buttons,
also use the buttons to scroll through the characters, e.g. to enter the Wi-Fi password. The two buttons have the
same function as the turning movement of knob (3) of the device.
• Pressing the knob (3) of the device corresponds to pressing the OK (N) button on the remote control. For example,
to open a menu option or confirm a selection.
40
(H and 8) and (F and 10) buttons and confirm with the OK button
(G and 6) button.
(F and 10) down and (H and 8) up, to navigate up or down in the menu. You can
(O and 5) button. If you want to delete the previous
(K) button on the remote control or with the
(M and 9) buttons. The button does not
(B) button on the remote control, or with
(H and 8)
(4) button of
(11) button of