SPECIFICATIONS
Model Number
Motor
Log
Diameter
Capacity
Length
Speed
Splitting Force
Hydraulic Pressure
Hydraulic Oil Capacity
Length
Overall Size
Width
Height
Weight without stand
Weight with stand
The diameter of the log is indicative – a small log can be difficult to split when it
has knobs or a particularly tough fiber. On the other hand, it may not be difficult to
split logs with regular fibers even if its diameter exceeds the max. figure indicated
above.
Noise emission values measured according to relevant standard.
Acoustic pressure level
Acoustic power level
Weighted root mean square acceleration according to relevant standard. :
< 2.5 m/s²
The declared vibration total value has been measured in accordance
with a standard test method and may be used for comparing one tool with
another that the declared vibration total value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission during actual use of the power
tool can differ from the declared total value depending on the ways in which the
tool is used and of the need to identify safety measures to protect the operator
that are based on an estimation of exposure in the actual conditions of use
(taking account of all parts of the operating cycle such as the times when the
tool is switched off and when it is running idle in addition to the trigger time).
230V~
LpA
LwA
The sound power pressure may exceed 85 dB(A), in
this case individual hearing protection must be
FB1500-5TEG52SC
50Hz 1500W
5 ~ 25cm
52cm
2800 min-1
5 t
20Mpa
2.4L
940mm
260mm
480mm
49kg
50kg
78 dB(A)
K = 3 dB(A)
89 dB(A)
K = 3dB(A)
ATTENTION !
worn.
S3
IP54
33