Publicité
Les langues disponibles
Les langues disponibles
10. PROBLEMS WITH THE COOLING
1.The cooling doesn't work at all.
- has the loosing current or automat failed?
- Connect the cooling again with an extension cord to another socket and
try it again.
- Is there electrical tension on connection 13 and 14 on the controller ?
2.The earth leakage or the automat is falling out
- There is a loose on the cooling. Where is it ?
Connect one by one the following parts again until the earth leakage or
automat doesn't fall out anymore.
- The vaporizing ventilators (12):
(disconnect the wires of the ventilators in the branch box (13)
underneath the leaking box and try it )
- The cooling group
(if all the above mentioned is tested and the problem still arise, there has
been probably a defect with the compressor or condensation ventilator.
The best thing you can do is sending back your cooling unit to your
supplier.
3.The cooling unit is on but isn't cooling at all or not enough.
Is the cooling unit frosted or polluted ?
Is the condensation battery clean ?
Are the ventilators inside and outside running ?
Are the lights on the regulator of the cooling burning (5 and 6) ?
If all the above mentioned is ok, probably some cooling liquid is gone.
Switch of the cooling immediately and refill the cooling unit.
ENGLISH
33
Publicité
