Schippers Europe DUMBOX Coolmax 5 Mode D'emploi page 30

2. CONSTRUCT
1. Condensation ventilator
2. Cupboard cooling group
3. Casing with electronic controller
4. Covering plate electrical
connections
5. Suction-pipe cooling liquid
6. Press-pipe cooling liquid
7. Temperature probe vaporizor
8. Connector 2P+A
9. Compressor
3. PLACE
The cooling unit is designed to use outside.
It's better not to place it in the sun. For green cooling units the temperature of
the outside of cooling unit can raise up to 50°C !!
Never place the cooling unit in the stable houses or in neighbouring spaces!
Even in the environment of fans on stable houses or cesspools. This will cause a
strong corrosion of the cooling unit at short notice.
4. DEALING - TRANSPORT
Watch out!
- Always transport the cooling unit upright!
- Never lift or pull the cooling unit at the copper pipes.
The cooling unit needs to be packaged very solid unit before transporting it.
We recommend to disinfect the cooling unit every time before transport. This
will lead to a higher level of hygiene and a lower risk of spreading disease
germs.
Parts
10. Automat
11. Condensation collection box
12.Vaporizor ventilators
13. Electrical branch box vaporizor
ventilators
14. Suction-pipe condensation water
15. Temperature probe in the box
16. Vaporizor – cooling battery
17. Isolated vaporizor space
18. condensation radiator
ENGLISH 28