Device Description; Initial Use; Charging The Body Brush Battery; Choosing And Fitting A Brush Attachment - Beurer FC 55 Mode D'emploi

IMPORTANT
Only specialist personnel may perform repairs on electrical devices. Improper repairs may subject users to considera-
ble danger. In the event of a fault or damage, have the device repaired by a certified specialist workshop.

5. Device description

1
4
1. Handle
2. ON/OFF/speed button
3. LED indicator lamp

6. Initial use

6.1 Charging the body brush battery

Charge the battery of the body brush for 2 hours before initial operation.
WARNING
Before starting the charging process, make sure that your hands and the mains adapter are dry.
To charge the body brush battery, proceed as follows:
1. Ensure that the body brush is switched off.
2. Connect the body brush to the mains adapter.
3. Insert the mains adapter into a suitable socket.
4. While charging is in progress, the LED lights for the ON/OFF/speed button
light up alternately in a circle. Once the body brush battery has been fully
charged, the LED lights for the ON/OFF/speed button light up permanently.
6.2 Choosing and fitting a brush attachment
The device has 2 different attachments.
Cleaning attachment: For daily cleansing
Exfoliation attachment: For exfoliating in the shower and in the bath in order to gently remove excess skin cells
5 6
2
4. Cleaning attachment: For daily cleansing
5. Exfoliation attachment: For revitalising exfoliation
6. Mains adapter
13
3