Ra - Read Next Sample Number; Rbn - Read Background Subtract; Rc - Read Calibration Due Date; Rd - Read Current Date And Time - Ludlum Measurements 3030P Manuel Technique

Modèle 3030P
Ludlum Measurements, Inc.
Pn
This command sets printer mode On/Off.
0 = Turn printing OFF.
1 = Turn printing ON.
2 = Return printing mode (OFF, ON).
Qx
This command sets quick power-on mode. The Model 3030P may be
configured to display certain parameters during power-up.
0 = Show parameters OFF.
1 = Show parameters ON.
2 = Return power-up mode (OFF, ON).
RA – Read Next Sample Number
This command reads the next sample number. Subtract one from this
number to get the total number of samples logged. Returns "nnnn."
RBn – Read Background Subtract
This command reads the alpha or beta background subtract value. The value
returned must be divided by 10 to get the correct value. Returns "nnnnnn."
1 = Read alpha background subtract.
2 = Read beta background subtract.
RC – Read Calibration Due Date
This command reads the calibration due date. Returns "MMDDYYYY."
RD – Read Current Date and Time
This command reads the current date and time. Returns "HH:MM:SS
MM/DD/YYYY."
REn – Read Efficiency
This command reads the alpha or beta percent efficiency. The value
returned must be divided by 10 to get the correct value. Returns "nnn."
1 = Read alpha percent efficiency.
2 = Read beta percent efficiency.
Manuel Technique
Page 33
Section 7
May 2013