Baumer CleverLevel PL20H Manuel D'utilisation page 15

14.5 qTeach configuration procedure
Step 1: Selecting the switch
A switch is selected by holding the screwdriver on
the qTeach area and removing it when the LED
displays the color assigned to the switch:
Yellow: SW1
„ „
Cyan: SW2
„ „
Orange: Factory setting
„ „
Configuration via qTeach is enabled in the factory settings and can be disabled by the user in FlexProgram.
www.baumer.com
5 s
+3 s
+3 s
Operating Instructions
Level measurement
CleverLevel
Adaptive trigger – hygienic/industrial
Step 2: Selecting the trigger type
The trigger type for the selected switch can be
chosen by holding the screwdriver on the qTeach
area and removing it when the desired trigger type
is displayed:
White: Window trigger
„ „
Green: Adaptive trigger
„ „
® PL20H/S
+ 3 s
15 / 44