BH HIPOWER SK LINE sportkoncept R250 Instructions De Montage Et Utilisation page 50

Options: - OFF (The welcome message is displayed by default)
7) Text
For personalising the welcome message, including, for example, the name of the
gymnasium.
Enables or disables sound messages emitted by the monitor.
Options: - ON
8) Sounds
ELEMENTS OF THE ELECTRONIC MONITOR (Fig 1).-
The electronic monitor is made up of two distinct areas:
The top area, Fig.2 (A – B – C) for the DISPLAY
The bottom area, Fig.3 (E – F – G) for the KEYPAD
DISPLAY.-
This area comprises of two screens.
(A) The top LED array, which displays real-time exertion, levels being produced during the selected
program.
(B) Bottom alphanumeric screen, which guides the user selection options and exercise.
The top screen (A) displays the various pre-programmed exercise profiles (programs) that we can select
and, during exercise, current exertion levels.
The bottom alphanumeric screen (B) is used to guide the user when selecting the exercise to do, as well as
displaying information about the exercise both during and after the session. The LED indicators (C) located
below the alphanumeric screen give a simultaneous readout of SPEED/R.P.M; TIME/DISTANCE;
CALORIES/WATTS; PULSE RATE and indicate which information is being displayed throughout the
exercise.
The data that are displayed on the LEDs (C) during exercise are as follows:
-STEPS/MIN: SPEED: This shows an estimated value of the linear velocity at which a bicycle would be
travelling based on the user's pedalling rate. The value is displayed in kilometres per hour (km/h)
-TIME: This shows the time that has elapsed since you started the exercise or, if a time limit has been
established, the amount of time left before the exercise finishes. The time is displayed in minutes and
seconds (mm:ss).
-DISTANCE: This shows the distance that you have travelled since beginning the exercise. The distance is
calculated by using the estimated linear velocity (SPEED) and the units displayed are kilometres and
hectometres
-CALORIES: This shows the estimated number of calories that have been burnt off up until now. This
calculation is based on the energy being produced and the weight and age values provided by the user.
-WATTS: This shows the amount of energy currently being produced during the exercise. This calculation is
based on the exertion level at which the user is working and the pedalling rate. The information is displayed
in Watts.
-PULSE: This shows the user's heart rate, assuming that this information can be accessed through the
hand-grip sensors or the telemetric chest band. When both of these are used together, priority is given to the
telemetric chest band. For more information about heart rate refer to the section entitled: Pulse
measurement; chest band and hand-grip
- ON (Allows the welcome message to be edited)
(Enabled)
- OFF (Disabled)
15
SK
LINE
sportkoncept