SOMFY Zigbee Sonesse 40 Notice page 12

EN
3. USE AND MAINTENANCE
͉
This drive is maintenance-free
3.1. USE FROM THE APPLICATION
The motor control and tilting control are possible from the
application: follow the instructions on the Set&Go Connect
application.
3.2. FACTORY MODE
͉
This reset deletes all remote control, all the settings, the network, and resets the motor's favorite
position .
Press and hold the motor head programming button (≈ 12 seconds)
until the product makes 3 back and forth movements (the first
feedback after 2 seconds, the second after 7 seconds and the third
after 12 seconds).
4. TECHNICAL DATA
Power supply
Frequency bands and maximum power used
Version Zigbee
Version Bluetooth®
Safety level
Operating temperature
Protection rating
We care about our environment. Do not dispose of the appliance with usual household
waste. Give it to an approved collection point for recycling.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by SOMFY ACTIVITIES SA is under
license. Other trademarks and trade names are those of their respective owners.
12 Copyright © 2018 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
Sonesse® 40 Zigbee
12 sec 12 sec
a a
= =
b b
= =
120 VAC 60 Hz
2.4 GHz - 2.4835 GHz
e.r.p. <63 mW
3.0
4.2
I
0°C to + 60°C
IP 30 (For indoor use only)
a
=
b
=