Other functions
Function Mode
The touch control, various effects, master tuning as well as
temperament settings can be specified from the Function
Mode. For the functions that can be set, refer to the "List of
functions" below.
Adjusting Parameter Settings in the Function Mode
1. While no song is being played back, press the FUNC-
TION button.
The FUNCTION button will light.
2. Press the SELECT
or
to be set.
The abbreviation for the function name appears in the
display.
3. Press the TEMPO + and – button to select the setting
or specify a value.
The setting continues to change while the TEMPO + or
– button is held down.
In addition, simultaneously pressing both buttons re-
turns the function to its default setting.
List of functions
No.
Function
1
Reverb
This effect adds ambience and depth to the sound, producing the sense of performing in a concert hall. *1
2
Brilliance
This effect changes the brightness of the sound.
3
Chorus
Chorus adds modulation to the sound, producing an expansively rich sound.
4
Keyboard touch control
Specify how the sound changes in response to the force used when you press a keyboard key. *2
5
Transpose
In some cases, a song may be written in a difficult key (e.g., many black keys), or you may wish to shift the pitch to match
another instrument or vocalist. In such cases, you can transpose (shift the pitch) so that you can use an easier fingering, or
use the same familiar fingering to play at a different pitch.
6
Master tuning
In order to adapt the G1/G1 Air pitch to that of another instrument, you can adjust the pitch in steps of 0.5 Hz.
7
Temperament
Select from nine temperaments, including the equal temperament, classical temperaments and an Arabic temperament. *3
8
Metronome: Time signature
9
Metronome: Sound
10
Metronome: Volume
12
button to select the function
Abbre-
Setting
viation
Display
oFF, 01, 02, 03
01, 02, 03
oFF, 01, 02, 03
01, 02, 03, 04, 05
–12...00...12
15.0...65.0
01...09
2–4...6–4
P–A, P–b, P––,
d–A, d–b, d––
1...13
4. To exit Function Mode, press the FUNCTION button.
The FUNCTION button goes dark.
1,4
2
Some functions are performed by pressing the Record
button [YES] after selecting the function name or the
setting. To cancel the function, press the Stop button
[NO].
The shortcuts refer to the names of buttons that can be
pressed while the FUNCTION button is lit to jump to a
specific place in the Function list.
When the G1/G1 Air is turned off, all functions return to
their factory default settings. However, the G1/G1 Air can
be set to save the function settings (see "Save parameter
settings" on page 13).
All settings except those for reverb and chorus are ap-
plied to all sounds.
When a song is deleted or the parameters are reset, do
not turn off the piano while "000" appears in the dis-
play.
Piano Songs cannot be copied or deleted.
Description [default setting]
Off, Shallow, Standard, Deep
[Depends on the sound]
Less Bright, Normal, Brighter
[02: Normal]
Off, Shallow, Standard, Deep
[Depends on the sound]
Light, Normal, Heavy, Stable, Steady
[02: Normal]
±11 [00]
415.0...440.0...465.0 Hz [440.0]
Equal temperament...Pelog scale
[01: Equal temperament]
2/4, 3/4, 4/4, 6/4 [4-4]
Pendulum emphasis, Pendulum bell,
Pendulum without emphasis,
Digital emphasis, Digital bell,
Digital without emphasis
[P–A: Pendulum emphasis]
1...13 [10]
3
2
3
Short Cut
METRONOME