Progress Lighting AirPro P250002 Manuel D'installation page 15

Ventilateur de plafond
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Figure 18
ON ECE
1 2 3 4
ON ECE
1 2 3 4
Figure 19
This receiver provides the following protective function:
1. Lock Rotor Position: The DC motor has a built-in safety
against a stalled or locked rotor condition (stalled blade
rotation). If there is an obstruction or fault with the motor, the
current monitoring function will automatically turn power off
to the motor after 30 seconds. Remove the obstruction and turn
the AC power off. Restore power and re-start fan motor.
2. Over 80W protection: When the receiver detects motor
power consumption which is greater than 80W, the receiver
power will be stopped and operation will immediately
discontinue. Wait for 5 seconds and then turn the receiver
power back on.
Speed settings for warm or cool weather depend on factors
such as the room size. Ceiling height, number of fans and so
on.
NOTE: To operate the reverse function on this fan, press
the reverse button while the fan is running.
Warm weather - (Forward) A downward airflow creates a
cooling effect as shown in Fig. 20. This allows you to set
your air conditioner on a warmer setting without affecting
your comfort.
Cool weather - (Reverse) An upward airflow moves warm
air off the ceiling area as shown in Fig. 21. This allows you
to set your heating unit on a cooler setting without affecting
your comfort.
Figure 20
Figure 21
12.

Publicité

Table des Matières
loading

Table des Matières