Briteq BT-Dazzle Mode D'emploi page 9

ENGLISH
Backlight
Backlight on: display is always lit.
Backlight off: display is dark when not used.
 Press the [MENU] button until the display shows [Back Light].
 Press the [ENTER] button, the display starts blinking.
 Use [DOWN] and [UP] buttons to select [On] (display always lit) or [Off] (display dark when not used).
 Once the right mode is shown on the display, press the [ENTER] button to select it.
 Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
Pan Inversion
[Normal]: Panning movement is not inversed.
[Inverse]: Panning movement is inversed
 Press the [MENU] button until [Inverse] is shown on the display.
 Press the [ENTER] button, the display starts blinking.
 Use the [DOWN] and [UP] buttons to select [normal] or [inverse].
 Once the desired mode is shown on the display, press the [ENTER] button to select it.
 Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
Tilt Inversion
[Normal]: Tilt movement is not inversed.
[Inverse]: tilt movement is inversed
 Press the [MENU] button until [Tilt Inverse] is shown on the display.
 Press the [ENTER] button, the display starts blinking.
 Use the [DOWN] and [UP] buttons to select [normal] or [inverse].
 Once the right mode is shown on the display, press the [ENTER] button to select it.
 Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
Function Delay
On the Function channel (CH14 or CH15) you can select some special functions, like "blackout
during gobo change" and others. With this option you can select the delay before a selected function
becomes active.
IMPORTANT INFORMATION: the function delay can only be set to zero seconds (no Delay) when you are
using a DMX-controller or DMX-software using presets for the DMX-values of the special functions.
Never use "no Delay" while using a simple DMX-controller with faders to set the functions manually!
 Press the [MENU] button until [Function Delay] is shown on the display.
 Press the [ENTER] button, the display starts blinking.
 Use [DOWN] and [UP] button to choose a value between [no Delay] / [1s Delay] / [2s Delay] or [3s Delay]
 Once the right delay is shown on the display, press the [ENTER] button select it.
 Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
Dimmer Speed
Allows you to select a fast instant dimming reaction or a slower smoot dimming reaction (like when
you dim an halogen lamp)
 FAST: dimming will be instantly and reactive.
 SMOOTH: "halogen" reactivity simulation activated
 Press the [MENU] button until Dimmer Speed is shown on the display.
 Press the [ENTER] button, the display starts blinking.
 Use [DOWN] and [UP] button to select [FAST] or [SMOOTH] .
 Once the right mode is shown on the display, press the ENTER button to select it.
 Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
BRITEQ
®
7/80
OPERATION MANUAL
BT-DAZZLE