FUXTEC FX-MT152 Mode D'emploi page 70

Original Bedienungsanleitung FUXTEC FX-MT152/-MT152E/-MT252_de_en_fr_ita_rev19
Mounting the grass trimmer
Step one:
Insert the key (1) into the hole in the gearhead so that the gear shaft is locked. Unscrew
and remove the nut. As this is a safety nut, please make sure that there is a left-hand
thread
Step two:
mount the cover (2), install the yarn package on the gear shaft. And then tighten it by
hand.
2
1
Warning!
Ensure that all components are correctly assembled and installed and that all screws are
tightened.
70