FUXTEC FX-MT152 Mode D'emploi page 58

Original Bedienungsanleitung FUXTEC FX-MT152/-MT152E/-MT252_de_en_fr_ita_rev19
Additional warnings for the pole saw attachment
Do not allow others to use this device unless they have been fully instructed, have read
and understood the device manual, and have been trained in the operation of the
device.
Prolonged use of the device exposes the user to shocks that can lead to
white finger disease (Raynaud's syndrome) or carpal tunnel syndrome. This
condition reduces the hand's ability to sense and regulate temperature,
causes numbness and heat sensations, and can lead to nerve and circulatory damage
and tissue death.
Not all factors leading to white finger disease are known. Still, cold weather, smoking,
and other conditions affecting the blood vessels and blood circulation, as well as
extensive or prolonged exposure to shocks, are mentioned as factors in the development
of white finger disease. To reduce the risk of white finger disease and carpal tunnel
syndrome, please note the following
ALWAYS WEAR EYE PROTECTION, EAR PROTECTION, AND
HEAD PROTECTION!
ALWAYS WEAR PROTECTIVE CLOTHING!
ALWAYS KEEP A MINIMUM DISTANCE OF 10M BETWEEN THE
DEVICE AND HIGH VOLTAGE LINES!
ALWAYS TURN THE DEVICE OFF AND MAKE SURE THE
CUTTING TOOL IS STOPPED BEFORE CLEANING, REMOVING
OR ADJUSTING IT.
WARNING:
EXHAUST GASES OF THIS PRODUCT CONTAIN
CHEMICALS THAT CAUSE CANCER, BIRTH DEFECTS
AND MAY CAUSE FURTHER DAMAGE
WARNING! NEVER CHANGE THE MACHINE. IMPROPER USE
OF THE DEVICE CAN CAUSE SERIOUS OR FATAL
PERSONAL INJURY.
58