Publicité
Les langues disponibles
Les langues disponibles
BM 2610A16273 07-13_BM 2610A16273 07-13 7/30/13 2:02 PM Page 12
CAUTION
To switch on the tool, slide the On/Off switch 14 to the "
(when working without self leveling) or to the "
working with self leveling). Immediately after switching on, the laser tool
sends laser beams out of the exit openings 1.
even from a long distance.
To switch off the laser tool, slide the On/Off switch 14 to the "off" position.
When switching off, the leveling unit is locked.
Make sure the tool and device are securely mounted
before use.
Using the Rotating Mount
Place the laser tool with the guide groove 15 on
the guide rail 16 of the rotating mount 19 and
slide the laser tool to the stop onto the mount.
To disconnect, pull the laser tool in the opposite
direction from the rotating mount.
Extending the Telescopic Legs
Unscrew the locking screw 17 for the extendable
stand. Pull out the stand. Lock the stand by
tightening the locking screw 17. Repeat the
process for the other two stands.
Operation
Initial Operation
Switching On and Off
Do not point the laser beam at persons or animals
and do not look into the laser beam yourself, not
-12-
on" position
on" position (when
Publicité
