Repair; Accessories - Festo ELGA-TB-G Notice D'utilisation

ELGA-TB-G, ELGA-TB-RF
9

Repair

Note
Retensioning of the toothed belt reduces its service life considerably. In addition, the
technical data, e.g. the feed constant, change.
• Make sure that the toothed belt is not retensioned.
The toothed belt is pretensioned so that it does not have to be retensioned during
its service life.
• Recommendation: send the ELGA to our repair service.
This way the required fine tuning and tests will be taken into special consideration.
• Information about spare parts and accessories can be found at: www.festo.com/spareparts
10

Accessories

Note
• Please select the corresponding accessories from our catalogue
( www.festo.com/catalogue).
Designation
Grease gun with needle-pointed nozzle
Nozzle pipe, axial outlet port
Nozzle pipe, radial outlet port
Oil
1) Only required for ELGA-TB-RF (
Tab. 6
Festo – ELGA-TB-G, ELGA-TB-RF – 1209a English
spare parts catalogue at www.festo.com/spareparts)
Part number/type
1)
647958/LUB-1
1)
647959/LUB-1-TR-I
1)
647960/LUB-1-TR-L
Constant OY 390, from Klüber Co., Munich
1)
33