Motorola SLIVER II Mode D'emploi page 5

You can charge the headset in several ways:
• Place the headset in the case, and plug the
charger into the case's micro USB port. The
headset charges first, then the case.
• Charge the case first, then place the headset
in the case when you need to charge it.
• Plug the charger directly into the headset's
micro USB port.
Notes:
• Fully charge the headset before you use it.
• The case or headset status light flashes when
it is charging. When not charging, the case or
headset status light shows a steady color that
indicates the battery charge level.
• When the charger is not attached, the case
status light turns off after 30 seconds.
Caution: Your battery is designed to last the life
of your device. It should only be removed by a
4 Charge it EN