Tv Soundconnect - Samsung HW-H450 Manuel D'utilisation

FUNCTIONS

TV SOUNDCONNECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
+ Connecting a TV to the Soundbar
1. Turn on the TV and Soundbar.
•
Set the "Add New Device" menu of the TV to
"On".
2. Press the ( ) button on the main unit's top panel
or the (SOURCE) button on the remote control
to select the TV mode.
3. On the TV, a message asking whether to enable the
TV SoundConnect function. "[Samsung]
Soundbar" is displayed on the TV screen.
4. Select <Yes> to finish connecting the TV and
Soundbar by TV remote control.
● Switching the Soundbar's mode from TV to
another mode automatically terminates
TV SoundConnect.
● To connect the Soundbar to another TV, the
existing connection must be terminated.
● Terminate the connection to the existing TV,
and then press the ► button on the remote
control for 5 seconds to connect to another
TV.
● The TV SoundConnect (SoundShare)
function is supported by some Samsung TVs
released from 2012 on. Check whether your
TV supports the TV SoundConnect
(SoundShare) function before you begin.
(For further information, refer to the TV's user
manual.)
● If your Samsung TV was released before
2014, check the SoundShare setting menu.
● If the distance between the TV and Soundbar
exceeds 5 m, the connection may not be
stable or the audio may stutter. If this occurs,
relocate the TV or Soundbar so that they are
within operational range, and then re-establish
the TV SoundConnect connection.
Connect
● TV SoundConnect Operational Ranges:
● The Play/Pause, Next, Prev buttons are not
+ Using the Bluetooth POWER On
function
The Bluetooth POWER On function is available after you
have successfully connected the Soundbar to a
Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON, turning
the connected TV on or off will turn the Soundbar's
power on and off as well.
1. Connect the TV to your Soundbar using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
Soundbar remote. "BLUETOOTH POWER ON"
appears on the Soundbar's display.
•
BLUETOOTH POWER ON : The Soundbar turns
on and off when you turn the TV on or off.
•
BLUETOOTH POWER OFF : The Soundbar only
turns off when you turn the TV off.
● This function is supported by some Samsung
● If the Soundbar is connected to a TV through
20
- Recommended pairing range:
within 50 cm
- Recommended operational range:
within 5 m
operable in TV SoundConnect mode.
TVs released from 2013 on.
TV SoundConnect, and you turn the
Soundbar off by turning off the TV, the
Bluetooth POWER On function will not turn
the Soundbar on, even if you connect
another Bluetooth device to it.