Publicité
Les langues disponibles
Les langues disponibles
EN – Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
II. CHARACTERISTICS
III. SAFETY INSTRUCTIONS
(A) General power tool safety warnings
WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Symbols
Explanation of symbols, if present on the machine.
Do not expose to weather conditions (ex.: storm, rain, snow ...) or moisture.
Do not use in damp or wet areas.
Caution! Risk of injury and/or damage and/or deterioration of product in case of
non-compliance to safety requirements
Read the instructions manual.
Class II product with double insulation
Wear protective equipment: face mask, ear and goggles protection
Wear protective gloves and shoes.
Keep all your body parts away from moving parts (blade, shaft).
Keep persons (esp. children) and animals away from product and working area
Do not clean, grease or repair parts when tools is running.
Do not remove protective and safety devices when tool is running.
Warning! Beware of electrical current
Disconnect product from its power source before maintenance, cleaning or any
intervention on product; or when you do not use product.
Disconnect product from its main power source, if product, power cable, or extension cord
is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information for its
safe disposal.
III. Safety instructions
IV. Getting Started
See Fig.1
See table 1
V. Operation
VI. Maintenance and Storage
Page 13 of 33
Publicité
