Blades
(Image 22)
The blades have two lateral pivots in their
support which are for centering them and
fixing them correctly to the pitcher.
To remove the blades from the pitcher:
1. Move the blade-fixing flange 180º to
the open position and pull the pitcher
support away, as indicated by the arrows
(Images 23 and 24).
2. Remove the blades carefully to avoid
cuts or other injuries (Image 25)
Image 22
To position the blades inside the
pitcher:
1. Place the blades inside the fitting of
the pitcher, taking care not to cut yourself
(Image 25).
2. Turn the pitcher around, keeping hold
of the blades in its fitting (Image 26).
3. Fit the pitcher support (with the fixed
Image 23
blade flange in the open position) onto
the blade and the three pivots at the base
if the pitcher (Image 27).
Image 24
4. Turn the blade-fixing flange 180º to
the closed position, ensuring that it is at
its limit (Image 28)
8
Image 25
Image 26
Image 27