AFG Mycook 1.8 Manuel page 6

To attach the pitcher:
Hold the pitcher by the handle and place
it onto the central unit, making sure the
arrows of the pitcher base and central unit
are lined up correctly. Turn the pitcher
in an anti-clockwise direction until the
arrow of the pitcher base coincides with
the lock of the central unit (Image 18).
To detach the pitcher:
Hold the pitcher by its handle and turn in an anti-
clockwise direction up to the limit (both arrows
coinciding) and lift the pitcher (Image 19).
Important: For safety reasons, the pitcher
cannot be covered or uncovered when it
is attached to the central unit. The arrow
of the pitcher base coincides with the
lock of the central unit. (Image 18)
Do not use force. A safety element might
be broken.
Image 17b
To cover or uncover the pitcher it must be
detached from the central unit turning it
clockwise until it comes off. (Make sure
that the arrow on the side of the pitcher
coincides with the arrow on the central
unit (Image 19).
Do not activate the heating function with
the pitcher empty.
Pitcher support with blade-fixing flange
(Image 20)
Image 18
The pitcher support is for:
1. Fixing the blades to the pitcher.
2. Fixing the pitcher to the central unit.
3. Supporting the pitcher when it is hot
on all types of surface, without causing
burns. (Image 21)
Image 19
7
Image 20
Image 21