AFG Mycook 1.8 Manuel page 4

Liquids can be added to the pitcher when
the measuring cup is positioned onto the
lid
Pitcher lid (Image 8)
The lid is for closing the pitcher and
activating the safety sensors.
There is a groove at the front, which fits
together with the pouring spout, and a
perforated tab at the back, which fits
together with the groove on the handle.
It also has a hole in the central part
through which the food is added;
introduce the spatula to stir it and attach
the measuring glass.
It incorporates a silicon seal, which
prevents liquids from seeping out between
the pitcher and the lid.
To set up the silicon join, ensure that the
thick side of the join is in contact with
the lid.
Important. Never use the lid with the
correct join attached.
(Images 9 and 10)
Image 7
Image 8
This thick side of the join should be
fitted in contact with the lid.
IMPORTANT:
PITCHER LID WHEN THE APPLIANCE
IS OPERATING, AS THERE IS A RISK
OF OVERFLOWING AND/OR BURNS.
BEFORE OPENING THE LID OF THE
PITCHER, SWITCH OFF MYCOOK AND
WAIT A FEW SECONDS FOR THE BLADES
TO STOP TURNING COMPLETELY.
5
Lid
NEVER OPEN
Image 9
Image 10
THE