AFG Mycook 1.8 Manuel page 12

Kneading/mixing button
Press the button to activate the kneading/
mixing function. The light indicator
lights up green and begins to count the
operating time.
Press the button to stop the kneading/
mixing function. The light indicator
switches off.
After the kneading/mixing
finishes and after previously selecting
a functioning time, the appliance emits
a warning sound and the light indicator
flashes. (Image 43)
To stop:
Press the kneading/mixing button again.
This function is
preparation of homogenous mixes of all
kinds of dough and mixtures.
The kneading/mixing function is activated
from a stop position. It is not advisable
to activate this function if the pitcher is
at a temperature higher than 60º C.
(Image 42)
Image 42
function
Image 43
suitable for the
13
Turbo speed button (Image 44)
Keep the button pressed to activate the
turbo function. The 10 maximum speed
light indicators will light up (Image 44).
If working without heat: When the button
is released the turbo function stops. The
maximum speed light indicators will
switch off.
If working with heat: For safety reasons
and in order to avoid slashes, the turbo
speed will increment progressively and
will function alone for a few seconds,
although the button should still be
pressed.
It is not possible to activate the turbo
function with speeds 1, 2 and 3.
The turbo function is the fastest and the
most powerful and is ideal for chopping
hard elements or a large quantity of
them.
Image 44