Chauvet DJ Obey 6 Guide De Référence Rapide page 5

Obey 6 QRG
Power
Mounting
Mounting Diagram
Fixture
Addressing
This product has an auto-ranging, external power supply that can work
with an input voltage range of 100 to 240 VAC, 50/60 Hz; it runs on
9 to 12 VDC, 500 mA.
To eliminate wear and improve its lifespan, during periods of
non-use completely disconnect from power via breaker or by
unplugging it.
Before mounting this product, read the
for mounting are included here to aid in installation.
The Obey 6 uses DMX addressing. The board controls lights with
specific DMX addresses and the lights must be addressed correctly for
the board to control them.
More than one light can have the same DMX address, but lights with
the same DMX address should be the same type of light.
Below is a chart showing the Obey 6 DMX addresses and the
corresponding fixture buttons.
Address
1
7
13
19
25
30
14.8 in (377 mm)
12.9 in (327 mm)
5
Safety Notes. The dimensions
3.1 in
(80 mm)
Fixture Button
<FIXTURES 1>
<FIXTURES 2>
<FIXTURES 3>
<FIXTURES 4>
<FIXTURES 5>
<FIXTURES 6>
EN