Télécharger Imprimer la page

Ribimex PRPVF500AUTO Manuel D'instructions Et D'utilisation page 9

Publicité

Les langues disponibles

Les langues disponibles

children.
Do not allow children to operate this product. It is not a toy.
Cleaning and user maintenance shall not be made by children.
When the product is not in use or before performing cleaning, turn it off, disconnect from
the power source.
Use attachments/accessories specified by the manufacturer.
Do not use in the presence of flammable liquids, gases or dusts.
Never leave the product running unattended.
Perform service maintenance by qualified personnel only.
3.2- Additional safety rules for submersible water pump
Make sure electrical connection is made within dry area and protected from flooding.
Maintain labels and rating plate through the life of service.
Before cleaning or changing accessories, turn it off, disconnect the power source.
Never run an overheated pump. If your pump is overheat, turn off immediately, and allow
cooling down.
Never use a pump in a flammable, explosive or corrosive environment.
3.3- Special warnings when using this product
The pump is suitable for clean water only, not for domestic sewage or water containing solid
particles or corrosive/flammable liquid.
Do not use the pump when someone or pet is in the water.
The power source must be earthed.
The pump must be connected to residual-current circuit breaker (RCCB) with rated leakage
current of no more than 30 mA.
The pump can be connected to shock-proof plug by professional electrician.
All power plug and extension cable used with this equipment must be of suitable waterproof
rating.
Leakage of lubriant oil may cause contamination to the water.
IV. GETTING STARTED
4.1- Unpacking
Remove the product from packaging
Check if the product and accessories (if any) are intact.
4.2- Content
1 water pump body
1 water discharge pipe
1 Instruction manual
4.3- Assembly
Connecting Water Discharge Pipe
Connecting the water discharge pipe to the outlet connector (body) by turning the pipe
connector knob. Make sure the provided gasket is inserted.
Page 9 / 19

Publicité

loading

Ce manuel est également adapté pour:

511736