Publicité
Les langues disponibles
Les langues disponibles
6.3- Disposal
• Do not dispose with household garbage. Do not throw into the environment.
• Dispose of the product in a collection centre for waste of electrical and electronic equipment,
or a waste drop-off centre; or seek advice from your local municipality.
• Proceed with disposal of the tool, accessories and packaging according to local regulations
regarding the protection of the environment.
6.4- Trouble Shooting
Problem
The pump stops working
suddenly
The pump starts and stops
frequently
The pump runs, but no or little
water flow
The pump cannot be shut down
Our warranty conditions are available from our STAV department [*] and on our website.
Should you have any repair requests under the warranty, please contact your retailer or our STAV
[*] who will inform you on the procedure.
Should you have any parts and/or accessories request, you can contact our STAV [*] to ask for the
product exploded view by indicating our reference and the serial number or batch number appearing
on the nameplate.
[*] STAV = Technical and After-Sales Service department
STAV contact details:
Tel : 08 92 35 05 77 (0,34€/min ; only in France) ; email :
Internet Website:
www.ribimex.com
Cause
Power disconnected
Overheated
Foreign matter related blockage Remove blockage and restart
Leakage or internal clogging
Insufficient water (lower than
impeller)
Pipe or hose bent or damaged
Inlet blockage
Control valve is gripped
Ribimex, 56 Route de Paris, F-77340 Pontault-Combault.
Trouble Shooting
Check fuse device and electrical
connection
Disconnect from power source
and allow the pump to cool
before restarting
the pump
Replace the leaking pipe, hose
and joints, clean blockage
Change working location or
position before restart the pump
Adjust/replace the hose/pipe
Clean the inlet
Contact service centre
sav@ribimex.fr
Page 12 / 19
Publicité
