Bergstrom LITE Instructions De Montage page 19

LITE
Introduce the supplied white cable in connector
10
position 17 (X).
Caution: If position 17 is taken, remove the
!
cable from this position, cut the terminals and
secure the joined cables, reintroducing the
terminal in position 17.
Remove the terminal with
the special tool
Connect the cable clamp in its original position
11
and disconnect the cable clamp (Y).
10
Fasten the cables in the supplied
terminal
Y
11
10
10
19
Insert the terminal in point 17
Y
11
EN
10